Why choose Chalco Aluminum 1060 electrical aluminum busbar
Chalco 1060 EC grade aluminum busbar conforms to IEC 60105, ISO 209-1, 2, DIN EN 755-2, DIN EN 755-5 standards, has good ductility, high formability and tensile toughness, fully meeting standard processing requirements (stamping, stretching).
Chalco Aluminum supplies 1050, 1060, 1070, 1100, 1350, 6060, 6082, 6101 etc. conductive aluminum busbar product. The products have been widely exported to Hitachi, ABB, Siemens, Legrand, Toshiba etc. companies, and enjoy good reputation from them.
Chalco Aluminum 1060 electrical aluminum busbar specification
| EC 1060 aluminum busbar specification | |
| Temper | T3, T4, T5, T6, T8 |
| Requirements for surface quality | Smooth surface without defects such as burrs and spots; The surface is clean, dust-free, oil-free, and free of other impurities; The oxide layer is uniform, dense, and has good corrosion resistance; |
| Surface treatment | Anodizing, electroplating, spraying, etc. Usually aluminum plating includes: silver, tin, nickel |
| Insulation treatment | Insulation coating: powder coating, epoxy resin coating or insulation paint coating, etc. Insulating sleeve: polyvinyl chloride (PVC), heat shrink tubing, or silicone rubber, etc. |
| Product packaging | When delivering according to length, it should be packaged in bundles and boxes, and when delivering according to quality, it should be packaged in discs, circles, or bundles. |
| Test | Conductivity test, temperature rise test, bending test, etc. |
| Standard | IEC 60105, ISO 209-1, 2, DIN EN 755-2, DIN EN 755-5:2008-06 |
| Dimensions and tolerance | |||
| Length | Maximum 6m [Click for size table] | ||
| Width | 10mm - 200mm | ||
| Width tolerance [mm] | b≤35.50 | ±0.40 | |
| 35.50<b≤100.00 | ±0.80 | ||
| 6>100.00 | ±1.20 | ||
| Thickness | 0.15mm - 40mm | ||
| Thickness tolerance [mm] | a≤6.30 | ±0.15 | |
| 6.30<a≤12.50 | ±0.20 | ||
| a>12.50 | ±0.30 | ||
| Minimum Bend Radius [mm] | 1x thickness (up to 12mm) 2x thickness (>12mm) | ||
Note: In the above table,
a=thickness, i.e. narrow edge size;
b=width refers to the size of the wide edge.
Properties of Chalco Aluminum 1060 electrical aluminum busbar
Chalco 1060 aluminum busbar has outstanding performance advantages in terms of conductivity and current carrying capacity. According to different busbar sizes, Chalco conductive aluminum bus bars can handle currents up to 4000A.
For specific requirements, please clickQuick Quoteto contact our customer service personnel. The following table is a reference table for the performance parameters of Chalco 1060 conductive aluminum busbar.
| Physical Properties | Specific Heat (gm.cal/°C) | 0.092 |
| Density (gm/cm2) | 2.91 | |
| Melting Point (°C) | 660 | |
| Mechanical Properties | Ultimate Tensile Strength (kgf/mm2) | 20.5/25 |
| Ultimate Shearing Strength (kgf/mm2) | 15 | |
| Elastic Modulus (kgf/mm2) | 6, 700 | |
| 0.2% Tensile-proof Strength (kgf/mm2) | 16.5/22 | |
| Electrical Properties | Specific Resistance (ʋʊcm) | 3.133 |
| Volume Conductivity (ʋʊmm2) | 31.9 | |
| Conductivity (% IACS) | 57 | |
| Co-efficient of expansion (mm/m/°C) | 2.3*10-5 |
Chemical composition of Chalco Aluminum 1060 conductive aluminum busbar
| Element | Composition (%) |
| Si | Max. 0.25 |
| Fe | Max. 0.35 |
| Cu | Max. 0.05 |
| Mn | Max. 0.03 |
| Mg | Max. 0.03 |
| Cr | - |
| Zn | Max. 0.05 |
| Ti | Max. 0.03 |
| Other each | Max. 0.03 |
| Other total | - |
| Al. | Min. 99.60 |
Advantage of Chalco Aluminum 1060 electrical aluminum busbar
Chalco can provide complete design, including machining, forming, and brazing. Cutting, stamping, bending, drilling and other processing can be completed according to the specific requirements of customers for current capacity and bending degree.
Chalco can provide surface coating and insulation processing for conductive aluminum busbars according to customer requirements to improve product corrosion resistance, aesthetics, and avoid short circuits and other issues.
- Usually made by extrusion or rolling.
- It has good corrosion resistance and good processability.
- High conductivity, effectively conducting current, reducing power loss during current transmission.
Application of Chalco Aluminum 1060 electrical aluminum busbar
- Power transmission;
- Electric vehicle battery pack and electric drive;
- Frequency converter and motor control cabinet;
- New energy such as new energy vehicles and solar power generation.
More electrical aluminum products in Chalco
- Conductive aluminum busbar
- EC Grade aluminum wire rod
- Electrical aluminum tubular bus pipe
- Aluminum plate strip foil for capacitor
- Aluminum wire for electrical application
Common sizes of Chalco Aluminum electrical aluminum busbar
| Square angle aluminum bar | ||||||||||
| 2mm | 2*30 | 2*40 | 2*67 | 2*70 | 2.5* 25 | |||||
| 3mm | 3*10 | 3*15 | 3*20 | 3*25 | 3*30 | 3*40 | 3*50 | 3*60 | 3*67 | 3*75 |
| 3*110 | ||||||||||
| 4mm | 4*10 | 4*15 | 4*20 | 4*25 | 4*30 | 4*40 | 4*45 | 4*50 | 4*60 | 4.6*60 |
| 4. 8*9.8 | ||||||||||
| 5mm | 5*15 | 5*20 | 5*25 | 5*30 | 5*35 | 5*40 | 5*50 | 5*60 | 5*80 | 5*100 |
| 6mm | 6*20 | 6*25 | 6*30 | 6*40 | 6*50 | 6*54 | 6*55 | 6*60 | 6*65 | 6*70 |
| 6*75 | 6*80 | 6*100 | 6*120 | 6*150 | 6*160 | |||||
| 6.3mm | 6.3*50 | 6.3*63 | 6.3*63.5 | 6.3*80 | 6.35*50.8 | 6.35*76.2 | ||||
| 7mm | 7.6*80 | 7*150 | 7*4*20*4 | |||||||
| 8mm | 8*11 | 8*30 | 8*40 | 8*50 | 8*51 | 8*60 | 8*63 | 8*63.5 | 8*65 | 8*70 |
| 8*80 | 8*90 | 8*100 | 8*120 | 8*125 | 8.8*28.6 | |||||
| 9mm | 9*170 | 9*125 | 9. 2*64 | |||||||
| 10mm | 10*20 | 10*25 | 10*30 | 10*40 | 10*45 | 10*50 | 10*60 | 10*63 | 10*65 | 10*70 |
| 10*80 | 10*90 | 10*100 | 10*110 | 10*114 | 10*120 | 10*125 | 10*140 | 10*150 | 10*160 | |
| 12mm | 12*30 | 12*40 | 12*45 | 12*50 | 12*60 | 12*70 | 12*76 | 12*80 | 12*100 | 12*120 |
| 12*125 | 12*130 | 12*140 | 12*150 | 12*160 | ||||||
| 12.5mm | 12.5*90 | 12.5*100 | 12.5*125 | 12.5*127 | 12.7*101.6 | 12.7*160 | ||||
| 13mm | 13*125 | 13*130 | 13*160 | |||||||
| 14mm | 14*100 | 14*120 | 14.5*80 | |||||||
| 15mm | 15*30 | 15*35 | 15*50 | 15*60 | 15*80 | 15*100 | 15*120 | 15*125 | 15*150 | |
| 16mm | 16*30 | 16*90 | 16*100 | 16*110 | 16*125 | 16*130 | 16*140 | 16*150 | 16*160 | |
| 20mm | 20*76 | 20*100 | 20*120 | 20*130 | ||||||
| Square bar | 19*19 | 30*45 | 15*15 | |||||||
| Round bar | Φ6 | Φ8 | Φ10 | Φ11 | Φ12 | Φ14 | Φ15 | Φ15.6 | Φ16 | Φ18 |
| Φ20 | Φ21 | Φ22 | Φ23 | Φ25 | Φ27 | Φ28 | Φ30 | Φ32 | Φ35 | |
| Φ38 | Φ40 | Φ45 | Φ50 | Φ55 | Φ60 | |||||
| Round angle aluminum bar | |||||||||
| 2mm | R2*20 | R2.5* 50 | |||||||
| 3mm | R3*30 | R3*40 | R3*50 | R3*60 | R3*80 | R3*100 | R3*120 | R3*160 | |
| 4mm | R4*25 | R4*30 | R4*35 | R4*40 | R4*50 | R4*60 | R4.1* 44.1 | R4.7*151 | |
| 5mm | R5*30 | R5*35 | R5*40 | R5*45 | R5*50 | R5*60 | R5*70 | R5*75 | R5*80 |
| R5*90 | R5*100 | R5*120 | |||||||
| 6mm | R6*40 | R6*50 | R6*60 | R6*70 | R6*80 | R6*100 | R6*120 | R6*140 | R6*160 |
| R6.3*63 | R6.35*76.5 | ||||||||
| 7mm | R7*70 | ||||||||
| 8mm | R8*40 | R8*50 | R8*60 | R8*80 | R8*100 | RS*120 | |||
| 10mm | R10*20 | R10*40 | R10*50 | R10*60 | R10*75 | R10*80 | R10*100 | R10*120 | R10*125 |
| R10*150 | R10*160 | R10*170 | R10.4*25 | ||||||
| 12mm | R12*80 | R12*100 | R12*110 | R12*120 | R12*125 | R12*150 | R12*160 | ||
| 12.5mm | R12.5*80 | R12.5*125 | R12.7*90 | R12.7*127 | |||||
| 13mm | R13*120 | R13*125 | |||||||
| 14mm | R14*100 | R14*120 | R14*150 | ||||||
| 15mm | R15*100 | R15*120 | R15* 130 | R15*150 | |||||
| 16mm | R16*150 | R16*160 | |||||||
| 19mm | R19.05*101.6 | R19.05*127 | |||||||
| 20mm | R20*80 | R20*120 | R20*130 | ||||||
| Special-shaped hypotenuse | *4*50 | *5*50 | *5*60 | *6*40 | *6*50 | *6*60 | *6*80 | *8*60 | *8*80 |
| *8*100 | *8*120 | *10*40 | *10*80 | *10* 100 | *10*120 | *12*80 | *12*100 | *12*120 | |
| *15*120 | *20*130 | *28*60 | |||||||