7A09 aluminum sheet is an Al-Zn-Mg-Cu alloy, an ultra-high-strength deformed aluminum alloy that was used in the aircraft industry in the late 1940s and is still widely used in the aviation industry. 7A09 aluminum sheet is used in the aerospace industry with high strength, good weight reduction effect and improved aircraft safety.
Chalco 7A09 aluminum sheet stock
Chalco is a well-known 7A09 aluminum sheet manufacturer in China. It has a large inventory of aluminum sheets that can be cut to corresponding sizes with low prices and fast delivery!
| Product | Width(in) | Length(in) |
| 0.039" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.059" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.098" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.118" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.156" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.197" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.236" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.315" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.394" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.472" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.63" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 0.787" 7A09-T6 Aluminum Sheet | 78.74" | 157.48" |
| 0.984" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 1.181" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 1.575" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 1.772" 7A09-T6 Aluminum Sheet | 78.74" | 157.48" |
| 1.969" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 2.165" 7A09-T6 Aluminum Sheet | 78.74" | 157.48" |
| 2.362" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 2.756" 7A09-T6 Aluminum Sheet | 78.74" | 157.48" |
| 3.15" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 3.543" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 3.937" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 4.331" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 4.724" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 5.118" 7A09-T6 Aluminum Sheet | 78.74" | 157.48" |
| 5.512" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 6.299" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 7.087" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
| 7.874" 7A09-T6 Aluminum Sheet | 59.055" | 118.11" |
7A09 aluminum sheet mechanical properties
| Tensile strength | ≥530MPa |
| Conditional yield strength | ≥400MPa |
| Elongation | ≥6% |
Characteristics of 7A09 aluminum sheet
- The strengthening effect of heat treatment is particularly good, the strength is high below 150℃, and the low temperature strength is particularly good.
- High specific strength, good fracture toughness and thermal conductivity.
- Good plasticity after solution treatment. The plasticity in the annealed and freshly quenched states is slightly lower than that of the 2A12 aluminum sheet in the same state, and slightly better than that of 7A04.
- Poor welding performance. Susceptible to stress corrosion cracking unless in T6 temper.
Application of 7A09 aluminum sheet
7A09 aluminum sheet is widely used in the aviation industry to manufacture various important parts.
7A09 aluminum is used in key components such as aircraft skins, wall panels, bulkheads, front beams, ribs, joints, struts and landing gear, cylinder hydraulic systems, hydraulic tanks with movable rods, outer tubes, etc. The lightness of aluminum can reduce the weight of the aircraft, but this does not affect the safety of the aircraft and can even improve it.
7A09 aluminum sheet packaging
1. Install wooden pallets. Reinforced with steel straps to avoid collisions during transportation
2. Can be packaged according to customer requirements
7A09 aluminum sheet manufacturer
As a professional aluminum sheet manufacturer and supplier in China, Chalco is one of the largest 7A09 aluminum sheet suppliers in China. We also produce aluminum coils, aluminum strips, coated aluminum coils, aluminum sheets, aluminum sheets, anodized sheets, embossed aluminum sheets, etc.
Chalco offers you top quality, attractive and reasonable prices. Excellent surface quality and packaging, fast delivery. If you are looking for 7A09 aluminum sheet manufacturer in China, Chalco is your best choice. We guarantee you the best price and quality service. For more details, please feel free to contact us directly.。
7A09 aluminum sheet price
Chalco 7A09 Aluminum Sheet price = Ingot Cost/Raw aluminum cost + Processing cost.
7A09 Aluminum alloy unit price is $/ton, $/kg, $/Pound, $/lbs.
7A09 Aluminum Sheet price will be different as per the below factors. Such as Length, Width, Thickness, State, Surfaces Treatment.
Business Term: FOB, CFR, CIF, DDP, DUP…
Payment Term: TT.LC.TT+LC…
